Cluster flies come inside in fall to spend the winter, not to breed or feed. On the first sunny autumn afternoons, they gather on a house’s warm south and west walls, then slip through gaps in the siding and around window frames into attics and wall spaces. They sit dormant until a mild day warms the roof, then wake up and drift toward the nearest lit window. That is how you end up with flies indoors in January. Vacuuming the live ones, clearing out the dead ones, and sealing the entry points solve it.
When the same slow, heavy flies keep turning up inside a Washington home every fall, most people assume something is rotting or that the house has a hygiene problem. It doesn’t.
Cluster flies have nothing to do with sanitation, and the standard advice for house flies will not make a dent. This post explains what is actually going on, why the problem repeats every year, and what finally stops it.
Cluster Flies Are Not House Flies
First, you need to know what you are dealing with, because the fix is completely different. A cluster fly moves slowly, bumps into things, and is easy to swat. Look at one at rest: its wings fold over each other across its back rather than stay apart. Up close and in decent light, short golden hairs cover the shoulders.
House flies are quicker; they come and go through open doors all summer and are drawn to food. Cluster flies are not. They will not go near your kitchen counter or your garbage, because adults feed on nectar outdoors and have no reason to be near either.
Quick ways to tell them apart:
- Slow, clumsy flight, usually along a window rather than around a room
- Wings that overlap across the back when the fly is at rest
- Dozens showing up at once in an upstairs room, with few or none downstairs
- Flies that show up on a warm day in February are almost always cluster flies
Why They Pick Your House Every October
Cluster fly young live underground and feed on earthworms. That’s why this becomes a lawn-and-pasture problem rather than a garbage problem. Homes with big grassy areas nearby get the worst of it. So does anything with a long, unshaded south or west wall.
That wall is the main draw. On a clear fall afternoon, it holds heat well after the air has cooled, and the flies land on it in numbers. From there, it is a short crawl into whatever gap is nearby. Siding joints, the space behind the trim board at the roof edge, and the gap at the top of a window frame all lead into an attic or the space inside a wall.
Western Washington gives them a long season for this. The warm-afternoon, cold-night pattern that starts in late September can run into November here, so they don’t make one move indoors; they keep arriving for weeks.
For the other pests that try to move in this time of year, see our rundown of common fall pests in the Pacific Northwest.
How to Get Rid of Cluster Flies Indoors
Once they’re inside, keep it simple. A vacuum with a hose attachment clears a windowsill faster than anything else and leaves nothing to wipe up. Empty the canister outside afterward, since crushed flies give off a faintly sweet, musty smell in large numbers.
Attic flies that have already tucked themselves into the insulation are best left alone until spring. Digging around after them scatters them into the living space, and they’re not damaging anything up there.
Dead flies are a different matter. A pile of dead flies in an attic corner or a light fixture becomes food for carpet beetles and other insects that feed on dead ones, creating a second, more expensive problem. Clear them out rather than leaving them.
Where they collect indoors:
- Upstairs window sills, particularly on the sunny side of the house
- Inside light fixtures, where the heat pulls them in
- Around attic hatches and recessed lights that are not sealed
- Behind curtains in a spare room nobody opens through the winter
Why Spraying the Attic Does Not Fix It
Treating the whole attic space at once kills what is in there on that day, and that is the end of what it does for you. It does nothing about the ones still landing on the outside wall next weekend, and it leaves you with the dead-fly pile problem described above.
Timing is what makes treatment work. A treatment applied to the outside walls and roof edge before the flies begin gathering treats the surface they land on, not the space they end up in. Once they’re already inside the wall, an outside treatment won’t reach them, and the next chance is before they gather again next fall. We handle this as part of our pest control services.
What Actually Keeps Them Out Next Year
Sealing is slow and unglamorous. It is also the fix that keeps working year after year. Fine mesh screen over attic vents and the vents under the roof overhang stop them at the obvious openings. Caulk seals the seams around window and door frames where the siding meets the trim, where most of them get through.
Check the attic hatch too. A loose one is a direct route from the attic into the hallway, and it explains most of the February windowsill mysteries. A length of weatherstripping around the frame costs almost nothing and seals it off.
Outdoor flies are a different job with different timing, and we keep that advice separate in our guide to outdoor fly control in the backyard.
Get Ahead of Next Fall’s Flies
If flies are already collecting on your upstairs windows this month, you are seeing only a small share of what went into the walls. We can treat the exterior surfaces they’re still landing on and find the gaps letting them through so next October is quieter. We offer free estimates and a Same Day Guarantee. Call us at 253-538-2576 to get started.
Areas we serve: